Parts Lists  Version 1 (for Kickstarter users)  
                       C) - Case4-Pi Kit  (for RaspPi)
Made up from Case4-Pi Kit and Case4-Battery Kit
The kits do not include a Raspberry Pi, power or the simple tools used to assemble
Pi-School TLBRC A) - HapPi add-on Kit *Motor connectors - for use with  jumper leads use sockets  (e.g. HapPi robot)   OR  for ordinary wire use screw connectors.                   driver  chip  spacer + screw 3 pin socket  330 ohm resistors 1K resistors diode 4 pin socket 26 pin LEDs              3 screw connectors (as shown)    11mm 26 pin 3 pin double socket   HapPi add-on PCB  chip  holder  *1 screw and 2 sockets connectors or  x 3 x2 x2 Made from    1) 1 x Case4-Robot chassis  2) 2 x wires for motors     (default being 2 x pair of jump leads) 3) 2 x Kre8 wheels + rubber tyres 4) 1 x Adhesive putty (Blu Tack) 5) 1 x 6volt battery holder 6)  Front wheel assembly made up from            (a) 2 x wood dowels and           (b) 6 x blue collars and           (c) 1 x ball wheel  7) 1 x Pen holder  8) 1 x metal rod  2mm dia. 9) 2 x geared down electric motors                         If supplied on its own also a ‘bolt on pack’   So you can bolt the Raspberry Pi directly  onto the chassis. a)  2 x 3mm x 16mm long dia. bolts b)  2 x 3mm Nuts c)  2 x 3mm washers  d)  2 x plastic spacers  x 10mm long B)- HapPi- Robot Chassis Kit  (for use with add-on boards)  D) - HapPi-Robot Kit  Made up from A)  HapPi add-on motor driver Kit  B)  Case4-Pi Kit C)  HapPi-Robot Chassis Kit       HapPi add-on   4 - 6Volts Power  -  +   Motor 1  Motor 2  11           12  15           16 GPIO Connector   1 2 3 4 5 6 7 8 9 10 11 12 14 15 16 17 18 19 20 21 22 24 25 26 13 23 Powered    Outputs  0V Inputs 7 8 10 0V 0V 0V 11  3 5 6 7 9 8 OPTION  E) - HapPi- Portable Pi Kit  + Note The DIY kit version is shown above, if buying a  ready soldered kit the motor cables will be soldered for you.     Made from   1) Case4-Pi case  2) Nut and bolt 3) Case4-Pi lid  4) Sticker sheet Case4-Pi   Case4-Battery   3